Indoor Flush Mounted Load Center Panel Board

flush-mounted-load-center-panel-board

Indoor Flush Mounted Load Center Panel Board – Tailored for Residential & Commercial Power Distribution

The Indoor Flush Mounted Load Center Panel Board by E-abel is designed primarily for residential and commercial distribution projects in the Americas. Compliant with ANSI standards, this panel board can accommodate anywhere from 8 to 42 circuits, making it ideal for general contractors, builders, installation service providers, wholesalers, and distributors. Whether it’s a standard electrical setup or a specialized solar project that requires additional features like an Automatic Transfer Switch (ATS), E-abel can provide the perfect load center solution for your needs.

Key Features

  1. Versatile Circuit Capacity

    • Supports 8 to 42 spaces, suitable for a broad range of residential and commercial power needs.

    • Configurable to meet specific amperage and circuit requirements.

  2. ANSI-Compliant & Single-Phase Three-Wire Standard

    • Built to meet ANSI guidelines for the American market.

    • Standard 120/240V single-phase three-wire configuration—ideal for typical North American residential and light commercial installations.

  3. Flush-Mounted Installation

    • Designed for indoor flush mounting, providing a clean, discreet appearance.

    • Semi-flush options also available based on project specifications.

  4. Robust Construction

    • Made from electro-galvanized steel with a thickness typically ranging 0.9–1.5mm.

    • Polyester powder-coated finish for enhanced corrosion resistance and durability.

    • Includes a secondary protective cover for added safety.

  5. Pre-Stamped Knockouts & Customization

    • Standard models come with knockouts on all four sides to streamline wiring.

    • Optional customization for solar projects or other specialized requirements (e.g., ATS device).

    • Flexible design supporting both overhead (OH) and underground (UG) feed configurations.

  6. Safety & Installation Guidance

    • Includes a comprehensive installation and safety manual to guide local electricians.

    • Dedicated labeling for breaker identification, ensuring quick and accurate circuit allocation.

  7. Standard & Custom Dimensions

    • Ranging from compact enclosures for smaller residential builds to larger boards for commercial facilities.

    • Refer to the dimension chart below for standard options (as shown in attached references).

    • Custom manufacturing is available upon request.

Technical Specifications

SpecificationDetails
Busbar RatingUp to 200A (Copper or Aluminum)
Voltage120/240V, Single-phase, Three-wire
Mounting StyleFlush / Semi-flush
Spaces (Circuits)8–42
MaterialElectro-galvanized steel (0.9–1.5mm)
Surface FinishPolyester powder coating (e.g., RAL7035)
Feed OptionsOverhead (OH) or Underground (UG)
Optional AccessoriesATS device, solar PV breakers, custom knockouts, etc.
ProtectionSecondary protective cover + labeling
Standard ComplianceANSI standards (suitable for North America)
Applicable BreakersCommon US brands (Square D Homeline, Siemens QP, etc.)
Operating Temperature-10°C to +50°C (varies by installation environment)

Custom sizes and configurations available upon request. Contact us now for customized service.

flush-mounted-load-center-panel-board-1

Standard Dimensions (Reference Examples)

Below are typical flush-mounted load center dimensions (W×H×D). Actual measurements and weight may vary based on circuit space and busbar rating. For detailed drawings or special configurations, please contact us:

ModelRated CurrentWidth (mm)Height (mm)Depth (mm)Spaces
LC-FM-8Up to 200A4005501008
LC-FM-12Up to 200A40060010012
LC-FM-24Up to 200A45085010024
LC-FM-32Up to 200A45095010032
LC-FM-42Up to 200A500100012542

Note: Custom heights, depths, and breaker configurations (e.g., solar integration, ATS) are available upon request.

flush-mounted-load-center-panel-board-2

Target Audience

  • Electrical Contractors & Builders: Looking for reliable, bulk solutions for residential or light commercial projects.

  • Installation Service Providers: Require easy-to-install load centers with clear labeling and knockouts.

  • Wholesalers & Distributors: Needing flexible inventory to accommodate diverse end-user requirements.

  • Project Developers: Involved in solar or advanced power setups needing optional ATS or specialized breaker configurations.

American-standard-power-distribution-panel-board-metering-panel

Advantages Compared to Competitors

FeatureE-abel Indoor Flush Mounted Load CenterTypical Competitors
Range of Spaces (8–42)Tailored for various residential/commercial needsLimited variety or single standard size
CustomizationSolar-ready & ATS integration optionsOften no or minimal custom features
Safety Covers & KnockoutsSecondary protective cover, pre-stamped knockouts, clear labelingBasic covers, fewer knockouts
Standards ComplianceStrictly meets ANSI & suitable for North American distributionMay partially meet local codes
Busbar & Material OptionsUp to 200A with copper/aluminum busbar; robust steel enclosureLesser steel thickness or limited amperage
 
load center panel board project case 1

Customer Feedback

⭐️⭐️⭐️⭐️⭐️ “We’ve been purchasing E-abel’s load centers in bulk for our commercial apartment projects. The flush-mount design and multiple knockout options really speed up installation.”
– Alex M., Electrical Contractor

⭐️⭐️⭐️⭐️⭐️ “E-abel’s flexibility in integrating an ATS for a solar project made our job so much easier. Highly recommended for anyone doing large-scale developments.”
– Maria D., Renewable Energy Engineer

📞 Get Your Business Up with E-abel Load Center Today!

Looking to streamline your electrical distribution projects with a reliable, ANSI-compliant flush-mounted load center?
Contact E-abel for bulk orders, custom design requests, or any specialized feature integrations such as solar PV breakers and ATS capabilities.

👉 Contact Us | Request a Quote

Summary

The Indoor Flush Mounted Load Center Panel Board by E-abel is a dependable choice for residential and commercial distribution setups in North America. With its 8–42 space range, robust electro-galvanized steel construction, and support for overhead or underground feeds, it caters to diverse project scopes—from basic home installations to complex solar ventures. Complete with a secondary protective cover, user-friendly labeling, and a comprehensive installation guide, E-abel’s load center ensures simplified on-site work and long-term reliability for contractors and distributors alike.

Want To Build Cooperation Relationship With E-Abel ?

E-abel Team will reply you in 6 hours with best solution.

Email: info@eabel.com

WhatsApp: +8613143198552

decoration 1

INQUIRY NOW

E-abel Team will respond you in 6 hours with best solution.